Key Features of UNS N06601 Inconel 601 Slip On SORF Flanges

• Manufactured from UNS N06601 Inconel 601 nickel alloy.
• Slip-on flange configuration for suitable piping applications.
• Raised Face (RF) gasket seating surface.
• Excellent resistance to high-temperature oxidation.
• Good resistance to cyclic oxidation and oxide-scale spalling.
• Useful resistance to high-temperature corrosion.
• Suitable for selected thermal-processing applications.
• Suitable for chemical and petrochemical applications where material compatibility is established.
• Available in different nominal sizes and pressure classes according to requirements.
• Can be supplied according to applicable ASTM, ASME or project specifications.
• Inspection and certification can be coordinated according to customer requirements.
• Suitable for worldwide export and Middle East project requirements.

UNS N06601 Inconel 601 Slip On SORF Flange Specifications

Specification	Details
Product	UNS N06601 Inconel 601 Slip On SORF Flanges
Material	Inconel 601 / Alloy 601
UNS Number	N06601
Werkstoff Number	2.4851
Flange Type	Slip-On Raised Face (SORF)
Material Standard	ASTM B564 / ASME SB564 where applicable
Dimensional Standard	ASME B16.5 / applicable project specification
Pressure Class	As specified by customer
Nominal Size	As specified by customer
Facing	Raised Face (RF)
Bore	According to pipe size and customer requirement
Finish	According to applicable flange standard
Testing	According to purchase order and applicable specification
Certification	According to customer and project requirements

Published supplier specifications for Alloy 601 flanges identify ASTM B564 / ASME SB564 as material standards and ASME B16.5 / B16.47 among dimensional standards, with slip-on raised-face flanges available as one of the product configurations. The exact standard and rating should be confirmed for each project. :contentReference[oaicite:4]{index=4}

ASTM B564 UNS N06601 Inconel 601 Flanges

ASTM B564 is a commonly referenced specification for nickel alloy forgings and related products used for flange and fitting applications. For Inconel 601 flanges, ASTM B564 / ASME SB564 may be specified depending on the project.

Synergy Engineering Solution can review requirements for ASTM B564 / ASME SB564 UNS N06601 Inconel 601 Slip On SORF Flanges according to customer drawings, purchase specifications and applicable engineering standards.

Customers should confirm the required flange size, pressure class, facing, bore, material condition, testing and certification requirements before placing an order.

ASME B16.5 Inconel 601 Slip On SORF Flanges

ASME B16.5 is commonly used for pipe flanges and flanged fittings within its specified size and pressure-class range. For an Inconel 601 Slip On SORF Flange, dimensional requirements such as outside diameter, bolt-circle diameter, bolt-hole size, flange thickness and facing dimensions are selected according to the applicable standard and pressure class.

The material specification and dimensional standard serve different purposes. The material specification establishes requirements for the alloy, while the dimensional standard defines flange geometry and pressure-class requirements.

Raised Face SORF Flange Design

A Raised Face Slip-On Flange incorporates a raised gasket seating surface. The raised face helps provide the intended gasket contact area in a bolted piping connection.

The gasket type, gasket material, bolt material, tightening procedure and flange surface finish should be selected as part of the complete joint design. These factors are particularly important for elevated-temperature or corrosive service.

Chemical Composition of Inconel 601

Element	Typical Specification Range / Maximum
Nickel (Ni)	58.0 – 63.0%
Chromium (Cr)	21.0 – 25.0%
Iron (Fe)	Balance
Aluminium (Al)	1.0 – 1.7%
Carbon (C)	0.10% max
Manganese (Mn)	1.00% max
Silicon (Si)	0.50% max
Sulfur (S)	0.015% max
Copper (Cu)	1.00% max

The exact chemical composition should always be verified against the applicable material specification and the Material Test Certificate supplied with the flange. Published Alloy 601 data consistently identifies nickel, chromium and aluminium as the key alloying constituents. :contentReference[oaicite:5]{index=5}

Why Is Aluminium Important in Inconel 601?

The aluminium content is one of the defining characteristics of Alloy 601. During elevated-temperature exposure, aluminium contributes to a protective oxide scale. Combined with the alloy's chromium content, this helps explain the material's strong oxidation resistance.

This characteristic makes Inconel 601 particularly relevant to applications involving repeated heating and cooling, furnaces, radiant tubes and other thermal-processing equipment. :contentReference[oaicite:6]{index=6}

High-Temperature Performance of Inconel 601

Inconel 601 was developed for applications requiring resistance to both heat and corrosion. Published technical information reports outstanding oxidation resistance and resistance to scale peeling at high temperatures. :contentReference[oaicite:7]{index=7}

This makes UNS N06601 a suitable candidate for certain high-temperature piping and flanged connections when the service environment and engineering design are compatible with the alloy.

Applications of UNS N06601 Inconel 601 Slip On SORF Flanges

• Chemical processing plants
• Petrochemical facilities
• Oil and gas processing equipment
• Refineries
• Industrial furnaces
• Heat-treatment equipment
• Thermal-processing systems
• Power-generation facilities
• Pollution-control equipment
• Gas-processing systems
• High-temperature process piping
• Specialized industrial equipment

Inconel 601 Slip On Flanges for Chemical Processing

Chemical processing systems may combine elevated temperatures with corrosive process fluids. In such applications, the flange material must be selected based on the actual process chemistry and operating conditions.

UNS N06601 Inconel 601 Slip On SORF Flanges can be considered for appropriate chemical-processing systems where the alloy's high-temperature oxidation and corrosion characteristics satisfy the engineering specification.

Inconel 601 Slip On Flanges for Petrochemical Plants

Petrochemical plants contain process lines, heaters, furnaces, reactors and other equipment operating under demanding conditions. Flanged joints must maintain mechanical integrity while remaining compatible with the process environment.

Synergy Engineering Solution supplies Inconel 601 Slip On SORF Flanges for suitable petrochemical applications based on project specifications, drawings and purchase requirements.

Inconel 601 Slip On Flanges for Oil and Gas Applications

Oil and gas facilities use specialized materials in production, processing and refining systems. Depending on the process temperature and corrosion mechanism, nickel alloys can be specified for selected piping components.

Our UNS N06601 Inconel 601 Slip On SORF Flanges can be supplied for applications where Alloy 601 has been selected by the engineering specification.

Inconel 601 Flanges for Refineries

Refinery equipment can experience high temperatures and aggressive process environments. Alloy 601's high-temperature oxidation resistance makes it relevant to selected refinery and thermal-processing applications.

Flanges used in such systems must be compatible with the pipe, gasket, bolts and operating conditions. Synergy Engineering Solution supports specification-based supply for refinery projects.

Inconel 601 Flanges for Furnace and Heat-Treatment Equipment

Heat-treatment equipment frequently experiences thermal cycling. Alloy 601 is used in various heat-treatment applications including radiant tubes, trays, baskets and fixtures. :contentReference[oaicite:8]{index=8}

Inconel 601 Slip On SORF Flanges can be considered for suitable high-temperature piping and equipment connections where a slip-on flange arrangement is permitted by the design.

Inconel 601 Slip On Flanges for Power Generation

Power-generation facilities contain process systems and equipment exposed to elevated temperatures and, in some cases, corrosive environments. Alloy 601 is used in selected power-generation applications, including tube supports and other thermal equipment. :contentReference[oaicite:9]{index=9}

The correct flange alloy should always be selected according to the actual service conditions and applicable design code.

Inconel 601 SORF Flanges for Pollution-Control Systems

Pollution-control and exhaust systems can expose components to high temperatures and aggressive gases. Alloy 601 has established applications in pollution-control and high-temperature environments. :contentReference[oaicite:10]{index=10}

Where flanged pipe connections are required, UNS N06601 Slip On SORF Flanges can be considered when the alloy and flange configuration satisfy the project requirements.

Advantages of Inconel 601 Slip On SORF Flanges

• Strong resistance to high-temperature oxidation.
• Good resistance to cyclic oxidation.
• Protective oxide scale associated with chromium and aluminium additions.
• Suitable for selected high-temperature industrial applications.
• Slip-on design can simplify flange installation for suitable systems.
• Raised face provides a defined gasket seating area.
• Suitable for various chemical and thermal-processing applications.
• Available in different sizes and pressure classes according to applicable standards.
• Suitable for worldwide industrial project supply.
• Can be supplied with inspection and material documentation as required.

Inconel 601 SORF Flange Size Options

Inconel 601 Slip On Flanges can be specified by nominal pipe size and pressure class. Published product ranges include various sizes and pressure classes, but actual availability depends on the applicable standard and manufacturing capability. :contentReference[oaicite:11]{index=11}

Customers should provide the required nominal diameter, pipe outside diameter, pressure class, flange standard and quantity when requesting a quotation.

Inconel 601 Slip On Flange Pressure Classes

Depending on the applicable dimensional standard and flange size, customers may require pressure classes such as Class 150, 300, 600, 900, 1500 or 2500. Other ratings may be available for specific flange types and standards.

The pressure rating should never be selected solely from the material grade. The complete pressure-temperature rating, flange size, standard and service conditions must be considered.

Inconel 601 SORF Flange Facing Options

• Raised Face (RF)
• Flat Face (FF), where applicable
• Ring Type Joint (RTJ), where applicable
• Other project-specific facing arrangements where permitted

The requested facing should match the mating flange, gasket and piping design.

Inconel 601 Slip On Flange Bore

The bore of a slip-on flange must be compatible with the pipe outside diameter and wall thickness. Customers should provide the pipe specification or dimensional details so that the correct flange bore can be selected.

Correct bore selection is important for fit-up, welding and alignment during installation.

Inconel 601 SORF Flange Inspection and Testing

Inspection requirements depend on the applicable material and dimensional standards, purchase order and project specifications. Synergy Engineering Solution can coordinate inspection documentation according to customer requirements.

• Visual inspection
• Dimensional inspection
• Flange thickness verification
• Outside diameter verification
• Bolt-hole inspection
• Bolt-circle inspection
• Facing inspection
• Bore inspection
• Material identification
• Chemical composition verification
• Mechanical testing where specified
• PMI where specified
• Third-party inspection where required

Material Test Certificate for UNS N06601 Flanges

A Material Test Certificate can provide traceability information including material grade, heat number, chemical composition, mechanical properties and applicable specification. Certification requirements should be defined in the purchase order.

For Middle East EPC and industrial projects, documentation requirements can vary by project, end user and inspection agency. Synergy Engineering Solution can coordinate documentation according to the customer's specified requirements.

Quality Control for Inconel 601 Slip On SORF Flanges

Quality control for a flange should cover both material identity and dimensional conformity. Important inspection points include flange type, size, pressure class, facing, bore, thickness, bolt-hole pattern, surface finish and markings.

For nickel alloy products, maintaining heat-number traceability and material identification is particularly important during project procurement and fabrication.

Marking of Inconel 601 Slip On Flanges

Flange marking may include material grade, nominal size, pressure class, applicable standard, heat number and manufacturer identification, subject to the applicable standard and customer requirements.

Proper marking supports traceability from procurement through fabrication, installation and maintenance.

Packaging of UNS N06601 SORF Flanges

Export packaging protects the flange face, machined surfaces and flange body during handling and transportation. Packaging requirements can be adjusted according to flange size, destination and customer requirements.

• Protective wrapping
• Plastic protection
• Wooden pallets
• Wooden cases where required
• Flange-face protection
• Moisture protection where appropriate
• Steel-strapped bundles
• Product identification labels
• Heat-number traceability
• Export-grade packing

UNS N06601 Inconel 601 Slip On SORF Flanges Worldwide Exporter

Synergy Engineering Solution is an India-based manufacturer, stockist and worldwide exporter of industrial nickel alloy products. We supply UNS N06601 Inconel 601 Slip On SORF Flanges for international projects and industrial applications according to customer specifications.

Our export services support EPC contractors, engineering companies, distributors, stockists, fabricators and industrial end users.

We provide support for technical specifications, product documentation, inspection coordination, export packaging and shipment requirements.

UNS N06601 Inconel 601 Slip On SORF Flanges for Middle East

The Middle East is an important market for oil and gas, petrochemical, refinery, power-generation and industrial projects. These industries can require specialized nickel alloy products for demanding temperature and corrosion conditions.

Synergy Engineering Solution has a strong export focus on the Middle East and GCC region for UNS N06601 Inconel 601 Slip On SORF Flanges.

• United Arab Emirates (UAE)
• Saudi Arabia
• Qatar
• Oman
• Kuwait
• Bahrain
• Other worldwide destinations

Inconel 601 Slip On Flanges Supplier in UAE

Synergy Engineering Solution supports UAE customers requiring UNS N06601 Inconel 601 Slip On SORF Flanges for suitable oil and gas, petrochemical, refinery, chemical-processing and industrial projects.

Customers can send the required flange size, pressure class, facing, bore, standard, quantity and delivery location to our sales team for quotation.

Inconel 601 Slip On Flanges Supplier in Saudi Arabia

Saudi Arabia has extensive oil, gas, refinery and petrochemical infrastructure. Synergy Engineering Solution supplies Inconel 601 flange products for suitable Saudi Arabian industrial and EPC requirements.

We support project procurement teams with specification-based supply, documentation and export packaging.

Inconel 601 Slip On Flanges Supplier in Qatar

Qatar's energy and gas-processing sectors require specialized piping materials and components. We support Qatar-based customers seeking UNS N06601 Inconel 601 Slip On SORF Flanges for suitable projects.

Inconel 601 Slip On Flanges Supplier in Oman

Oman's oil and gas and industrial sectors use specialized corrosion-resistant and high-temperature materials. Synergy Engineering Solution supports Oman enquiries for Inconel 601 Slip On Raised Face Flanges.

Inconel 601 Slip On Flanges Supplier in Kuwait

Kuwait's oil, gas, refinery and petrochemical sectors require reliable piping components for demanding applications. We supply UNS N06601 Inconel 601 Slip On SORF Flanges according to customer specifications.

Inconel 601 Slip On Flanges Supplier in Bahrain

Synergy Engineering Solution supports Bahrain customers requiring Inconel 601 Slip On Flanges for suitable industrial, refinery, petrochemical and process applications.

Why Choose Synergy Engineering Solution?

• Leading manufacturer, stockist and worldwide exporter.
• Specialized supply of nickel alloy products.
• Strong Middle East and GCC export focus.
• India-based international supply operation.
• Support for EPC and engineering projects.
• Specification-based product supply.
• Inspection and certification coordination.
• Export-grade packaging support.
• Support for distributors and industrial buyers.
• Customer-specific technical requirements.
• Worldwide shipment coordination.

How to Order UNS N06601 Inconel 601 Slip On SORF Flanges

For an accurate quotation, customers should provide complete technical and commercial information.

• Material grade: UNS N06601 / Inconel 601
• Flange type: Slip-On Raised Face / SORF
• Nominal flange size
• Pressure class
• Flange standard
• Facing requirement
• Bore requirement
• Quantity
• Testing requirements
• Inspection requirements
• Material certification requirements
• Packaging requirements
• Delivery destination

Request a Quote for UNS N06601 Inconel 601 Slip On SORF Flanges

If you are looking for a reliable UNS N06601 Inconel 601 Slip On SORF Flanges manufacturer, stockist, supplier or worldwide exporter, contact Synergy Engineering Solution.

Send your required flange size, pressure class, facing, standard, quantity, inspection requirements and delivery location to our sales team.

Frequently Asked Questions About UNS N06601 Inconel 601 Slip On SORF Flanges

1. What are UNS N06601 Inconel 601 Slip On SORF Flanges?

They are slip-on raised-face pipe flanges manufactured from Inconel 601, a nickel-chromium-iron alloy with aluminium, and used for suitable industrial piping connections.

2. What is the UNS number of Inconel 601?

The UNS designation of Inconel 601 is N06601. The alloy is also commonly identified as Alloy 601 and Werkstoff 2.4851.

3. What does SORF mean?

SORF generally means Slip-On Raised Face. It describes a slip-on flange with a raised gasket seating face.

4. What is the main advantage of Inconel 601?

The major characteristic of Inconel 601 is its excellent resistance to high-temperature oxidation. Its chromium and aluminium additions contribute to the protective oxide layer. :contentReference[oaicite:12]{index=12}

5. What is the chemical composition of Inconel 601?

Published specifications identify approximately 58–63% nickel, 21–25% chromium, 1.0–1.7% aluminium and iron as the balance, with controlled amounts of carbon, manganese, silicon, sulfur and copper. :contentReference[oaicite:13]{index=13}

6. What standard is used for Inconel 601 flanges?

ASTM B564 / ASME SB564 can be used for nickel alloy forgings and flange products, while ASME B16.5 is commonly used for flange dimensions and pressure classes within its scope. The exact standards must be confirmed against the project specification.

7. Where are Inconel 601 Slip On Flanges used?

They can be used in suitable chemical processing, petrochemical, refinery, oil and gas, furnace, heat-treatment, power-generation and high-temperature industrial applications.

8. Do you export Inconel 601 Slip On Flanges worldwide?

Yes. Synergy Engineering Solution is a worldwide exporter of industrial products, with a particular export focus on the Middle East and GCC markets.

9. Do you export Inconel 601 Flanges to the UAE?

Yes. We support UAE customers and EPC procurement requirements for UNS N06601 Inconel 601 Slip On SORF Flanges.

10. Do you supply Inconel 601 Flanges to Saudi Arabia?

Yes. We supply Inconel 601 flange products for suitable Saudi Arabian industrial, refinery, petrochemical and engineering requirements.

11. Do you export to Qatar, Oman and Kuwait?

Yes. Our Middle East export focus includes Qatar, Oman and Kuwait, along with UAE, Saudi Arabia and Bahrain.

12. What information is required for a quotation?

Customers should provide flange size, pressure class, flange standard, facing, bore, quantity, testing requirements, certification requirements and delivery destination.

13. Can Inconel 601 Slip On Flanges be supplied with inspection documents?

Inspection and certification can be coordinated according to the applicable specification, purchase order and project requirements.

14. Can you provide export packaging?

Yes. Export-grade packaging can be arranged according to flange size, destination, transportation requirements and customer specifications.

15. How can I contact Synergy Engineering Solution?

You can contact Synergy Engineering Solution at +91 83699 01616 or sales@synergytubes.com. Our address is 84/86, 7th Khetwadi Back Road, Mashalawala Building, Gr. Floor Room No. 4, Mumbai-400004, India.